Instruments

Located in A149 CLSL; available to all users.

This instrument has an Oxford Instruments helium cryostat, ER4119HS high sensitivity cavity, and a E4116000 dual mode cavity.

The EMXPlus is normally set up to do RT/LN₂ work. If you are interested in running experiments at liquid helium temperatures you should give advance notice to staff at least a week in advance so we can set up the cryostat. We will also block out time for exclusive use of the helium system and encourage other groups wishing to do liquid helium experiments to run during this time.

Located in A149 CLSL; available to all users.

This instrument has an Oxford Instruments helium cryostat and is capable of operating in Pulse or Continuous Wave mode.

The helium cryostat is normally installed in the Elexsys1 system and will only be removed under special circumstances. Room temperature data can be collected without the use of liquid helium but if any temperature below room temperature is desired, the helium temperature controller will have to be used.

Located in 14D Medical Sciences Building by special request to Mark Nilges.

This instrument has an APD helium cryostat, E238 TM110 cavity, E-229 Goniometer, and a zero-field sweep through power supply.

The Varian X-band is normally setup up to do RT/LN₂ work. If you are interested in running experiments at liquid helium temperatures you should give advance notice to staff at least a week in advance so we can setup the cryostat. We will also block out time for exclusive use of the helium system and encourage other groups wishing to do liquid helium experiments to run during this time.